Professional electric Wax Warmer and Heater for soft, bead warm, paraffin, crème and strip wax.
Wax Melter for hair removal with adjustable temperature for salon-quality results.
How to Use
Before use, please read precautions and warnings carefully.
Place Soft Depilatory Wax or Stripless Hot Wax into the Warm Wax Heater. Turn it on and wait for the wax to warm before using.
Heating indicator light will reflect when wax is ready to be used. Control the temperature with the temperature regulator knob, test the temperature on a small area before applying.
2-IN-1 SYSTEM WITH REMOVABLE POT - The heavy-duty removable inner pot holds up to 500ml of wax and is extremely easy to clean.
Simply lift it up using the attached handle for safe and efficient removal of melted wax. Should you wish to use a tin of wax, you can place the tin directly into the wax warmer without the inner pot.
Directions: Using the Warm Wax Heater with Soft Depilatory Wax, plug the Warm Wax Heater into an electrical outlet (Use a cardboard collar ring around the opening in the top to avoid spilling).
Remove the lid from the Soft Depilatory Wax and drop the container into the opening in the Warm Wax Heater. Set the Warm Wax Heater to “HI” for approximately 30 minutes or until the wax appears soft.
Clean the skin area to be waxed with our Pre-Wax Gel and pat the skin dry. Lower the heat to “MED” to allow the wax to cool so it appears like a thick honey; take out a portion of warmed wax using the plastic spatula. Spread a vertical row of wax that is no wider than the Wax Strip. (IMPORTANT – REMEMBER TO TEST WAX TEMPERATURE BEFORE APPLYING TO SKIN).
Lay the Wax Strip on top of the wax and press it down using your knuckles. Work your knuckles in the same direction as your hair growth.
Hold the skin down firmly and use your other hand to remove the Wax Strip from your skin.
Pull the strip away from the direction of your hair growth.
The amount of time to keep the wax on “HI”,” MED” and ”LOW” will vary according to wax type and the ambient room temperature. Therefore, do not leave product unattended while heater is on.
Cleaning the Warm Wax Heater - Leave the warmer turned on while you pour 1/3 of a cup of a wax cleaner into the wax pot or chamber. However, the warmer should only be warm enough to melt the wax and not so hot that it can boil the wax cleaner.
Put a wool pad on the chamber and leave it in for one to two minutes or until the pad soaks up the wax and the wax cleaner.
Wipe the wool pad around the wax pot or chamber to remove the residue wax. You can use a wooden spatula to wipe the wool pad around the chamber, so you won't have wax on your hands.
Wipe the wool pad around until all the dried wax is removed from the pot.
Ingredients
Hardware. See product insert.
Precautions
READ ALL OFF THE INSTRUCTIONS BEFORE USE. To reduce risk of burns, electrical shock, fire or injury never operate the Warm Wax Heater if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged in any manner or if it has been dropped into water or is wet. DO NOT place or store the Warm Wax Heater where it can fall or be pulled in to a tub or sink. DO NOT place the Warm Wax Heater into water or any liquid. Keep surrounding area dry. If the Warm Wax Heater falls into water, unplug it immediately. DO NOT reach into the water. (AS with all electrical devices, electrical parts are electrically live even when the switch is off, always use caution). Close supervision is important when the Warm Wax Heater is used by, on or near children. Keep the cord away from heated surfaces. DO NOT immerse the Warm Wax Heater into water or other liquids. 7. Avoid hanging the cord over a counter or table where it can be pulled on, by children or tripped over unintentionally.8. Always use and place the Warm Wax Heater on a level surface. Unplug the Warm Wax Heater when not in use. Allow to cool before handling, cleaning, or storing the warmer. Do not wrap the cord around the Warm Wax Heater when in use. Attachments not recommended by the manufacturer may cause hazards. Test temperature of the water or wax before putting hand into the Warm Wax Heater. Use this Warm Wax Heater only for its intended use as described. CAUTION: EXTREMELY HOT WAX MAY CAUSE BURNS.
Product Info: Works with Soft Depilatory Wax and Strips, Wax Beads, Stripless Film Wax and Paraffin Wax; Professional results at home; Adjustable temperature allows for more control maximum 80°C.
Preparation: Ready to use in 20 – 30 minutes.
Results: Smoothest application.
Skin Type: Normal skin types, depends on the type of wax being used.
Ideal For: Professional home wax users. 2 in 1 system – use the pot for hot wax or paraffin wax and use a can by placing directly into the heater – no pot required.
Box Contents: Wax heater + aluminium pot with plastic handles + collar ring
