HairGo Stripless Film Wax - Aloe

How to use:

Before use, please read precautions and warnings carefully.

Break off the desired number of blocks and heat in a warm wax heater or in the microwave with a microwavable cup or wax plate.
If using a microwave place two or more blocks in a microwavable wax cup (sold separately). The number of blocks needed will vary depending on the size of the area to be treated. Important - place microwavable wax cup on a plate in the centre of the microwave oven. Heat for 2-5 minutes (depending on your microwave and number of blocks used). Do not leave the microwave unattended and be sure to constantly check on the wax, at least every minute. Use an oven glove or towel when removing the wax from the microwave. Leave to cool for 2-5 minutes. Test the temperature on a small area before applying. See below for testing.
If using a warm wax heater break off at least two blocks and place them inside the warm wax heater
(number will vary depending on the area to be treated). Plug the heater into the wall. Turn on the warm wax heater, set to ±40° degrees (if using Pro-Wax 100 set temperature setting to Hi) and wait at least 15-20 minutes for the wax to heat and melt. (Temperature setting varies depending on the brand of wax heater). Once wax is melted turn to medium heat and allow to cool for 5 minutes before use. Test the temperature on the inside of the wrist before applying.
Skin prep - For maximum effect, hair should be 2-mm long. Recommended temperature of use is ± 40 degrees. (Heat the wax on high for 10-15 min to reach melting point, then reduce to a lower setting that is comfortable for application. If wax appears very runny, it is likely too hot for use). It is important to test the temperature of the wax by applying a small quantity on the inside of the wrist with a spatula. If it is too hot, reduce the heat accordingly.
How to apply - Use HairGo Pre-Wax Gel on the application area and allow to dry with a spatula, spread a thin layer of wax onto the area to be treated, in the direction of hair growth. Smooth the wax over the area to be treated, and rapidly tear off against the direction of hair growth. Apply after-wax oil or lotion. For usage queries or troubleshooting, please email info@hairgo.co.za

Aloe Vera Colophonium (Rosin), Ethylene/YO Copolymer, Hydrogenated Coconut Oil, Alkyl Methicone, Titanium Dioxide, CI:4700(yellow ll) CI:61565(green) Azulene Colophonium (Rosin), Bees Wax, Glyceryl Hydrogenated Rosinate, Paraffin, Methly Hydrogenated Rosinate, Titanium Dioxide, Paraffinum Liquidum (Mineral Oil), CI:61565 (Green6).

Read and follow precautions carefully. Suitable for use on legs, arms, underarms & bikini line. NOT SUITABLE FOR USE ON EYES, NOSE, EARS, ANUS, GENITALS, NIPPLES OR ANY OTHER INTERNALLY EXPOSED BODY PART. Suitable for use on head and face by professionals and highly experienced wax users. Be sure to first test your skin reaction on a small area you want to treat, if after 24 hours there is no adverse effect, continue to use. If you experience irritation or an adverse reaction during use, remove the product immediately using baby oil and rinse thoroughly with cold water. If a burning sensation, itching, or skin irritation persists after use, seek medical advice. In case of ingestion, seek medical advice immediately. Avoid contact with eyes. In case of contact with eyes, seek medical advice immediately. Waxing is suitable for pregnant women but may cause bruising. Always leave 72 hours between hair removal sessions. Skin may be more sensitive for a short time after use, so avoid scratching. If you are on medication that can affect the skin or have a skin related disorder, check with your doctor before use. Do not use on areas treated with Retin-A, Glycolic Acid or Alpha Hydroxy products. Do not sunbathe or use any products containing perfume or alcohol for at least 6-8 hours before and after, waxing. Do not bath or shower for at least 6 hours after waxing. Do not use on varicose veins, scars, moles, sunburn, blisters, wounds, irritated skin or skin that has previously had an adverse reaction to waxing. Waxing is not suitable for diabetics, the elderly and anyone taking oral retinoids. Only use on clean, dry skin that is free from lotions and oils (may use Hairgo Pre-Wax Gel). Ensure wax is warm to the touch (not hot) before application. If using a Warm Wax Heater, make sure to only plug it in when it is in use. If using a microwave, please read the microwave warning carefully. All microwaves have different wattage. Adjust times accordingly, depending on your microwave. Product is harmful if swallowed. KEEP OUT OF REACH OF CHILDREN. Irritant. In the case of ingestion, contact a medical professional or the Poisons Information Helpline (Toll Free: 0861 555 777) immediately and keep the packaging on hand to give a full description. WARNING - MICROWAVE OVEN DISCLAIMER/INDEMNITY Due to the variability of microwave functions, HairGo does not accept liability for any injury or damage caused by the preparation of this product. Heating times provided are only an indication and may not apply to all microwaves. This product has been tested on a 900-watt microwave. If a higher wattage microwave is used, times must be reduced. If a lower wattage microwave is used, times may be increased. Exercise caution when adjusting times. Heating times may also be changed if a larger or smaller amount of wax is being heated. Exercise caution when adjusting times.